Shelby GT350 Snake Cobra Logo Vinyl Sticker Decal Ford Mustang various sizes
Shelby Cobra Vinyl Decal. Sizes are by heigth of the decal. We provide quality glossy vinyl in all colors listed! – Stainless Steel. – Pot plant holders.
2x KC HiLites Flex Era 3 LED Light Bar Cover HID Overlay Vinyl Decal Sticker
KC Hilites KC Logo Overlay Vinyl Decal for Gravity Flex Era LED Light CoversThese decals have been test fit on the Flex Era 3″ Light covers to cover the stock Yellow KC LogoListing is for 2 stickersBlack is Matte Finish. Red, White, Blue, Silver, Lime Green and Orange are Gloss FinishFree shipping with tracking includedApproximate Size:Width x Height2.2″ 2.5″ About Vinyl Decals:These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window.Vinyl Decals come in 3 pieces:1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied)2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing)3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied)Application Tips:1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 50°F & 90°F.2. Do not touch the adhesive backing, oils from your skin will prevent sticking.3. Before applying decal make sure the surface is cleanApplication Instructions:1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles.6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface.7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
2x KC HiLites Flex Era 3 LED Light Bar Cover HID Overlay Vinyl Decal Sticker
KC Hilites KC Logo Overlay Vinyl Decal for Gravity Flex Era LED Light CoversThese decals have been test fit on the Flex Era 3″ Light covers to cover the stock Yellow KC LogoListing is for 2 stickersBlack is Matte Finish. Red, White, Blue, Silver, Lime Green and Orange are Gloss FinishFree shipping with tracking includedApproximate Size:Width x Height2.2″ 2.5″ About Vinyl Decals:These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window.Vinyl Decals come in 3 pieces:1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied)2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing)3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied)Application Tips:1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 50°F & 90°F.2. Do not touch the adhesive backing, oils from your skin will prevent sticking.3. Before applying decal make sure the surface is cleanApplication Instructions:1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles.6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface.7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
2x Rigid 360 Series 6″ Overlay Vinyl Decal Sticker 36362-SB LED Light Cover
Rigid 6″ 360 Series Light Cover Vinyl Decal Overlay Sticker. (Holds your decal or sticker together until it is applied). Middle layer is your actual decal or sticker. (protects the adhesive until the decal is ready to be applied).
2x Rigid 360 Series 4″ Overlay Vinyl Decal Sticker 36363-SB LED Light Cover
Rigid 4″ 360 Series Light Cover Vinyl Decal Overlay StickerThese decals have been test fit on the Rigid 4″ 360 Series Light Covers covering the stock White Rigid LogoListing is for 2 stickersBlack is Matte Finish. Red, White, Blue, Silver, Lime Green and Orange are Gloss FinishFree shipping with tracking includedApproximate Size:Width x Height3″ .5″ About Vinyl Decals:These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window.Vinyl Decals come in 3 pieces:1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied)2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing)3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied)Application Tips:1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 50°F & 90°F.2. Do not touch the adhesive backing, oils from your skin will prevent sticking.3. Before applying decal make sure the surface is cleanApplication Instructions:1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles.6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface.7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
2x KC Hilites SLIMLITE 5109 LED Cover Overlay Vinyl Decal Sticker
KC Hilites KC Logo Overlay Vinyl Decal for SLIMLITE KC 5109 LED Covers(Decal only covers not included)These decals have been test fit on the SLIMLITE Light covers to cover the stock Yellow KC Logo Listing is for 2 stickers buy as many as you need Black is Matte Finish. Red, White, Blue, Silver, Lime Green and Orange are Gloss Finish Free shipping with tracking included Approximate Size: Width x Height 2.75″ 3.15″ About Vinyl Decals: These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window. Vinyl Decals come in 3 pieces: 1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied) 2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing) 3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied) Application Tips: 1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 50°F & 90°F. 2. Do not touch the adhesive backing, oils from your skin will prevent sticking. 3. Before applying decal make sure the surface is clean Application Instructions: 1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker. 2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces. 3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape 4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles. 6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface. 7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
2x Bose Logo Vinyl Sticker Decal 4″ 6″ 8″ 12″ 10″ 16″ 20″ 23″
Bose Logo Vinyl Cut decal. Prices are for 2 stickers. 4″, 6″, 8″, 10″, 12″, 16″, 20″ or 23″ widths. Free shipping with tracking included Dimension Chart: Width x Height 4″ .5″ 6″ .7″ 8″ 1″ 10″ 1.2″ 12 (11.5″) 1.4″ 16″ 2″ 20″ 2.4″ 23″ 2.8″ About Vinyl Decals: These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window. Vinyl Decals come in 3 pieces: 1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied) 2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing) 3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied) Application Tips: 1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 50°F & 90°F. 2. Do not touch the adhesive backing, oils from your skin will prevent sticking. 3. Before applying decal make sure the surface is clean Application Instructions: 1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker. 2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces. 3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape 4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles. 6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface. 7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
2x Toyota Supra 5th Gen Vinyl Sticker Decal 4″ 8″ 12″ 16″ 20″ 23″
Toyota Supra 5th Gen Logo Vinyl Cut decal. Prices are for 2 stickers. 4″, 8″, 12″, 16″, 20″ or 23″ widths.Free shipping with tracking includedDimension Chart:Width x Height 4″ x .85″8″ x 1.75″12″ x 2.6″16″ x 3.5″20″ x 4.35″23″ x 5″ About Vinyl Decals:These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window.Vinyl Decals come in 3 pieces:1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied)2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing)3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied)Application Tips:1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 50°F & 90°F.2. Do not touch the adhesive backing, oils from your skin will prevent sticking.3. Before applying decal make sure the surface is cleanApplication Instructions:1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles.6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface.7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
2x GT3 Vinyl Sticker Decal 4″ 6″ 8″ 12″ 16″ 20″ 23″
GT3 Logo Vinyl Cut decal. Prices are for 2 stickers. 4″, 8″, 12″, 16″, 20″ or 23″ widths.Black and White are matte finish. Red, Blue, Orange and Silver are Gloss FinishFree shipping with tracking includedApproximate Sizes:Width x Height4″ x .9″6″ x 1.4″8″ x 1.85″12″(11.5″) x 2.65″16″ x 3.7″20″ x 4.6″23″ x 5.3″ About Vinyl Decals:These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window.Vinyl Decals come in 3 pieces:1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied)2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing)3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied)Application Tips:1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 50°F & 90°F.2. Do not touch the adhesive backing, oils from your skin will prevent sticking.3. Before applying decal make sure the surface is cleanApplication Instructions:1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles.6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface.7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
2x Mobil1 Mobil 1 Oil Logo Vinyl Sticker Decal 8″ 12″ 16″ 20″ 23″ LARGE
Prices are for 2 stickers. 8″, 12″, 16″, 20″ or 23″ widths. (Holds your decal or sticker together until it is applied). Middle layer is your actual decal or sticker. (protects the adhesive until the decal is ready to be applied).