2″ x 50′ Two Inch Roll Solid Accent Premium stripe in many colors
Up for “Buy It Now” is Two Inch (2″) Roll of Solid Stripe 50 feet long. includes a 50-foot roll of stripe made from 2mil high performance automotive vinyl. This is high performance cast PVC film with a permanent, acrylic, pressure-sensitive adhesive. Designed for superior quality exterior graphics for the automotive, signage, and commercial industries. • Film: 2.0-mil premium cast vinyl with clear, acrylic, permanent, pressure-sensitive adhesive. • Liner: 78# white kraft. • Exterior Durability: 9 years*. Use to customize and accent your vehicle or boat. I also have 3mil stripe listed on ebay. Contrary to what might make sense, the thinner the is the better material. This is a superior material. This is the same vinyl as the pinstripe I have listed. This stripe has a clear overtape to be removed after applying. I have other colors besides the ones in the drop down menus. Please contact seller for availability.Check for the colors shown below: Universal Products started manufacturing striping in 1977 with the level of qualitynecessary to service the professional restyler. Shortly thereafter, a new adhesive wasdeveloped, exclusively for Universal Products, and was dubbed “TFX” adhesive. Thisrevolutionary adhesive system made it possible to reposition the tape without breaking itor leaving an adhesive residue behind and immediately gained popularity and recognitionamong professional restylers. We believe the exclusive “TFX” adhesive system standsalone in the professional marketplace, and is the benchmark for all other brands. While our product offering has expanded to include some of the most sought aftergraphic designs in the industry, our commitment to quality for the professional restylerhas not wavered. You can be assured that whatever design concept you’re trying toachieve, our comprehensive collection of pressure sensitive materials will provide youwith a profitable means of reaching your goals. From dynamic accent designs and full sizegraphic kits to innovative roll stripe configurations, we will continue the tradition of vinylgraphic excellence and personalized service. At Universal Products we want to clear yourpath to greater success by giving you the tools necessary to let your imagination soar. Universal Products is ISO 9001-2000 certified. To achieve this certification, UniversalProducts met all standards for the design, development, production, and service of theirproducts. ISO 9001-2000 is a standard known world wide, and is recognized as the topquality assurance program. Universal Products wants to provide you with the absolutebest vinyl striping and graphics.Recommended Application Instructions All surfaces are contaminated to some degree. To ensure good adhesion to any vehicle surface it is critical that you follow these recommended procedures in decontaminating and preparing the surface prior to any vinyl product installation. Note: A clean, lint free towel or cloth must be used between each of the cleaning steps. Cleaning Procedures:Remove heavy road grime or tar by using a solvent, such as acetone, zylene, or kerosene, on a clean, lint free towel. (Please note that repeated use of solvents may cause damage to painted surfaces. Prior to using any solvent, apply to an area on the vehicle to test for negative reaction.) When a silicone substance or residue is suspected, wash and rinse the contaminated area with liquid dish detergent and warm water. Then dry the surface with a clean, lint free towel or cloth.After using the solvent and/or detergent wash, use a clean, lint-free towel or cloth. Finish up the cleaning process by wiping down the entire area with Isopropyl Alcohol. To avoid recontamination during the final cleaning step, wipe the surface in just one direction, using a clean, lint-free towel or cloth. Temperature Recommendations:Universal Products recommends the temperature be between 60 and 80 degrees at the time of installation. We also discourage any installation when temperatures are above 90 degrees and below 50 degrees. Surface temperatures should be brought to within the 50 and 90 degree range before attempting installation. Application Procedures:A squeegee should be used to install graphics and striping. Because vinyl is a pressure-sensitive product it is imperative to squeegee a second time after the premask is removed. After the premask is removed, a protective sleeve or towel should be placed over the squeegee to protect the striping and graphics.Please note when removing premask/application tape, always pull it slowly and back onto itself at a 180-degree angle.A sharp air release tool or pin should be used to pierce the outer edge of any remaining trapped air bubbles. Using a knife or blade to release the air will result in a cut rather than a puncture in the vinyl.The cutting or trimming of any stripe or graphic should be done with the sharpest knife possible. Any openings, such as doors should be trimmed back away from edges at least 1/8 of an inch. (Please note when burying one stripe under another stripe such as in a pinstripe, you must overlap the bottom stripe with the top stripe by at least 1/4 of an inch). A 50-foot roll of stripe made from 2mil high performance automotive vinyl. This is high performance cast PVC film with a permanent, acrylic, pressure-sensitive adhesive. Designed for superior quality exterior graphics for the automotive, signage, and commercial industries. • Film: 2.0-mil premium cast vinyl with clear, acrylic, permanent, pressure-sensitive adhesive. • Liner: 78# white kraft. • Exterior Durability: 9 years*. Check out my other items for sale.